Silent SOS vs Loud SOS: How Lumae oncall Alerts Your Contacts

Sky Blue Lumae oncall personal safety alarm clipped to a canvas tote on an evening walk

Lumae oncall offers two ways to trigger an alert from your paired iPhone: Silent SOS and Loud SOS. The difference is what happens at the alarm itself. Silent SOS keeps it quiet; Loud SOS adds a siren and flashing light. Both contact-alert modes require initial setup and a nearby, connected iPhone.

Silent SOS and Loud SOS at a glance

Mode What you do What happens
Silent SOS Quickly press the alarm's side button three times. The alarm stays silent and dark while your paired iPhone sends the configured messages and starts the call.
Loud SOS Pull the ring. Keep it out for about five seconds to trigger the contact alert. The siren and flashing light start when you pull the ring. The iPhone contact alert follows after the trigger delay.

A single press of the side button controls the light; it is not Silent SOS. Learn the difference before carrying the alarm, so you do not have to work out the controls when you need them.

What the two modes change

Get familiar with both. Silent SOS provides a way to alert your chosen contacts without sounding the alarm's siren. Loud SOS adds a sound and light signal around you while also offering the iPhone contact alert when the ring stays out for about five seconds.

Neither mode guarantees that someone nearby will respond or that your contact will answer. Silent SOS describes the alarm: your iPhone still shows calls and messages as usual. It does not put your phone into a hidden or silent mode.

What do my contacts receive?

After setup, your iPhone sends your configured SOS message and location information, including a map link, then calls your selected contact. The messages and call come from your paired iPhone.

Your location is sent once per alert using your iPhone's location. This is not continuous live tracking. Lumae oncall alerts the people you choose; it does not call 911 or provide a monitored emergency-response service.

What needs to be connected?

Contact alerts work with iPhone. Complete the Lumae SOS shortcut and AssistiveTouch setup, choose your message recipients and call contact, and keep your paired iPhone nearby with Bluetooth and AssistiveTouch on and a cellular signal. Carrier rates may apply.

The siren and light do not require an iPhone connection. That is different from SOS messages and calls, which depend on the phone and setup conditions above. Follow the Lumae oncall iPhone setup guide for the pairing and button-assignment steps.

What if I pull the ring by mistake?

Reinsert the ring to stop the siren and flashing light. If the ring was out for about five seconds or longer, tell your contact that it was a false alarm. Do not assume reinserting the ring cancels an SOS already triggered on your iPhone or recalls messages already sent.

Prepare before the first trip

Tell your contacts before testing. Test Silent SOS and Loud SOS separately after setup, and confirm that the messages arrive and the call reaches the person you selected. Keep the sounding alarm away from ears and warn anyone nearby. Follow the setup guide's permission and locked-phone testing steps; a test is part of preparation, not a promise of guaranteed delivery in every situation.

Keep your alarm charged and accessible, alongside a charged phone and a practical route plan. If you need emergency services, contact them directly when it is safe to do so.

Explore Lumae oncall and its iPhone requirements. Using Lumae Essential or Lumae 1.0 instead? Their controls differ; use the personal alarm guide for Essential and Lumae 1.0.

Keep one within reach.

Shop Lumae oncall