Setup guide
Set up your Lumae oncall
iPhone versionAbout 5 minutes, once. You need the alarm, your iPhone and the people you want to alert. Everything here matches the printed guide in the box.
1Know your alarm
| Pull ring | |
|---|---|
| Pull it out | Siren and strobe. Push it back in to stop. |
| Keep it out 5 sec | Loud SOS: your iPhone calls and texts too |
| Side button | |
| Press 3× quickly | Silent SOS: no siren |
| Press once | Light on. Again for strobe, again for off. Turns off by itself after 3 minutes. |
| Hold until it beeps | Bluetooth on (needed for SOS) |
| Press 2×, then hold | Bluetooth off (2 beeps) |
2How SOS works
After the one-time setup in section 3, your iPhone automatically texts your location and an SOS message to your contacts, then calls your emergency contact. Keep your iPhone nearby with Bluetooth on. Your iPhone screen still shows the call and messages.
Pulled the ring by mistake? Push it back in, and if it was out for 5 seconds or more, tell your contact it was a false alarm.
3Set up iPhone SOS
Step 1 · Add the Lumae SOS shortcut
1. Open the Lumae SOS link on your iPhone (the button below is the same link as the QR code in your printed guide). Tap Get Shortcut, then Add Shortcut.
Opens in the Shortcuts app · shoplumae.ca/sos
Important: always tap Always Allow
Whenever your iPhone asks about location or messages, tap Always Allow (or Allow if it’s the only choice). Never tap Allow Once, or it will ask again in an emergency.
2. Open the Shortcuts app and tap … on Lumae SOS. In all three Send actions, tap Recipients and add the people who should get your location and SOS text. In the Call action, tap Contact and pick the person to call. Tap Done.
↑ Add one or more people in each Send action
↑ Add one person to call
Step 2 · Connect the alarm to your iPhone
- Press and hold the alarm’s side button until it beeps. Its Bluetooth is now on.
- On your iPhone, open Settings › Bluetooth. Turn Bluetooth on, tap iOS personal alarm, then tap Pair. (picture a) The alarm gives a quick beep when it connects.
- Open Settings › Accessibility › Touch › AssistiveTouch and turn it on. Scroll down to Pointer Devices, tap Devices, then tap iOS personal alarm. (b, c)
- Silent SOS: tap Customize Additional Buttons… A pop-up appears. Leave it open and press the alarm’s side button 3 times quickly. Your iPhone opens a button screen (for example, Button 1). Scroll down to Shortcuts and choose Lumae SOS. (d)
- Loud SOS: the siren is 130 dB, so hold the alarm at arm’s length, away from anyone’s ears. Go back and tap Customize Additional Buttons… again. With the pop-up open, pull the ring out and keep it out for about 5 seconds. Your iPhone opens a second button screen (for example, Button 2). Choose Lumae SOS, then push the ring back in.
Step 3 · Test it
- Tell your contacts you’re about to test.
- Test Silent SOS: press the side button 3 times quickly. Your contacts should get the messages and your emergency contact a call, with no pop-ups. If a pop-up appears, tap Always Allow and try again.
- Test Loud SOS: hold the alarm away from your ears, pull the ring for about 5 seconds, then push it back in. Your contacts should get the same messages and call.
- Lock your iPhone and test Silent SOS and Loud SOS again.
4Every day
- Keep AssistiveTouch on. SOS only works while it’s on. Its small round button on your screen is normal; make it fainter in AssistiveTouch › Idle Opacity.
- The alarm reconnects to your iPhone on its own when both have Bluetooth on and are close by.
5Battery and charging
Low battery? The light flashes red 10 times and the alarm beeps when you turn on the light or pull the ring. Charge it soon.
- Charging port: USB-C
- Charging time: about 1 hour. The light stays red while charging and turns green when full. The alarm beeps when you plug in or unplug the cable.
- Standby: 90–180 days
- Battery: 225 mAh / 3.7 V
After charging, press and hold the side button until it beeps to turn the alarm’s Bluetooth back on.
6Troubleshooting
SOS doesn’t call or text
- Make sure the alarm shows Connected in Settings › Bluetooth. If not, hold its side button until it beeps. It gives a quick beep when it connects.
- Make sure AssistiveTouch is on and both buttons are set to Lumae SOS.
- Make sure you tapped Always Allow when your iPhone asked about location and messages.
- Still not working? Contact us and we’ll help you sort it out.
The siren goes off when bumped
The ring isn’t fully in. Push it straight down firmly until it clicks into place.
Important
- Lumae oncall texts and calls the contacts you choose.
- This is the iPhone version. It works with iPhone only.
- SOS calls and texts are made by your iPhone. They need your iPhone nearby with Bluetooth and AssistiveTouch on and a cell signal. The siren and light work without your iPhone.
- Your location comes from your iPhone and is sent once each time SOS is triggered. There is no live tracking.
- Not a toy. Keep away from young children.
- Never sound the siren close to anyone’s ears. Keep the alarm away from water and heat, and don’t open it. Recycle it with electronics, not in household garbage.